Model M102-C: Difference between revisions

From FembotWiki
Jump to navigation Jump to search
(Created page with "A")
 
No edit summary
 
(7 intermediate revisions by the same user not shown)
Line 1: Line 1:
A
You just fade away as you take this entrance until you can see something in what was still the void and a robotic voice says:
 
- Performing a general scan...
 
- A failure was found in the secondary processors.
 
Analyzing...
 
It does not represent a problem for the operation of this unit.
 
- Initializating operations.
 
You wake up abruptly in an Android maintenance facility. The first thing you see is your shortcut panel open and your entire female body dressed in a school outfit lying on a stretcher (apparently) along with a cable connecting to a computer that executes commands to a robotic arm that is Remove burned out processors and replace them with new ones. Which caused a small tingle. You try to move but you can't and when you do your HUD shows an analysis
 
- All the small motors along with the gyroscopic system have been deactivated.
 
You try to create a connection with the computer but fail, causing the computer to display a message on your HUD as a warning:
"If you try to hack this device again your AI system will be disabled".
 
So you decide...
 
[[Recreate a connection]]
 
[[Do what it says]]
 
[[You send a message to the computer]]

Latest revision as of 01:12, 19 July 2024

You just fade away as you take this entrance until you can see something in what was still the void and a robotic voice says:

- Performing a general scan...

- A failure was found in the secondary processors.

Analyzing...

It does not represent a problem for the operation of this unit.

- Initializating operations.

You wake up abruptly in an Android maintenance facility. The first thing you see is your shortcut panel open and your entire female body dressed in a school outfit lying on a stretcher (apparently) along with a cable connecting to a computer that executes commands to a robotic arm that is Remove burned out processors and replace them with new ones. Which caused a small tingle. You try to move but you can't and when you do your HUD shows an analysis

- All the small motors along with the gyroscopic system have been deactivated.

You try to create a connection with the computer but fail, causing the computer to display a message on your HUD as a warning: "If you try to hack this device again your AI system will be disabled".

So you decide...

Recreate a connection

Do what it says

You send a message to the computer