Model M102-C: Difference between revisions

From FembotWiki
Jump to navigation Jump to search
No edit summary
No edit summary
 
Line 11: Line 11:
- Initializating operations.
- Initializating operations.


You wake up abruptly in an android maintenance facility.The first thing you see is your shortcut panel open and your entire female body lying on a stretcher (apparently) along with a cable that connects to a computer that executes commands to a robotic arm that is removing burned-out processors and changing them for new ones. Which gave you a little tingle. You try to move but you can't and when you do so your HUD shows an analysis:
You wake up abruptly in an Android maintenance facility. The first thing you see is your shortcut panel open and your entire female body dressed in a school outfit lying on a stretcher (apparently) along with a cable connecting to a computer that executes commands to a robotic arm that is Remove burned out processors and replace them with new ones. Which caused a small tingle. You try to move but you can't and when you do your HUD shows an analysis


- All the small motors along with the gyroscopic system have been deactivated.
- All the small motors along with the gyroscopic system have been deactivated.

Latest revision as of 01:12, 19 July 2024

You just fade away as you take this entrance until you can see something in what was still the void and a robotic voice says:

- Performing a general scan...

- A failure was found in the secondary processors.

Analyzing...

It does not represent a problem for the operation of this unit.

- Initializating operations.

You wake up abruptly in an Android maintenance facility. The first thing you see is your shortcut panel open and your entire female body dressed in a school outfit lying on a stretcher (apparently) along with a cable connecting to a computer that executes commands to a robotic arm that is Remove burned out processors and replace them with new ones. Which caused a small tingle. You try to move but you can't and when you do your HUD shows an analysis

- All the small motors along with the gyroscopic system have been deactivated.

You try to create a connection with the computer but fail, causing the computer to display a message on your HUD as a warning: "If you try to hack this device again your AI system will be disabled".

So you decide...

Recreate a connection

Do what it says

You send a message to the computer